Automatic Burger Patty Forming and Interleaving Machine
Home » Products » Forming Machine » Automatic Burger Patty Forming and Interleaving Machine

Automatic Burger Patty Forming and Interleaving Machine

loading

A burger patty forming line with automatic paper interleaving. Patties are formed to a fixed weight and diameter, the TZJ-600 unit lays a separator sheet between every layer, and the stack leaves arranged for the tray or carton. The interleaver runs a 600 mm belt to match the MF600 former, with a 2.25 kW drive and 50 L/min of compressed air; MF400 and MF240-II versions to order. 304 stainless.
Availability:

Product Description

This line forms burger patties and lays a paper sheet between every layer before the stack goes to packing. The part that decides whether the output is usable is not the press — it is the paper.

What the paper actually does

Patties coming off a former are cold, moist and soft. Stacked bare they press into one another under their own weight and lose their edge; put the stack in a freezer and they bond into a block. A separator sheet between layers keeps every patty flat, square-edged and individually removable, so the stack can be de-stacked by hand or by a separating machine without tearing.

Doing that by hand is the step most plants underestimate. It is a person laying sheets into a moving line all shift, and the count per tray drifts as they tire. Running the paper feed off the same drive train as the former removes both problems at once.

Three stages on one line

Forming. Minced meat is fed into the former and pressed through a mould that fixes the weight, diameter and thickness of every patty. A product change is a mould change rather than a machine change.

Interleaving. The TZJ-600 unit couples to the former's outfeed and inserts a sheet between product layers as the patties travel. It is a separate module rather than part of the press, which is why the same unit can be fitted to different formers.

Arranging. The interleaved patties are collected in the count and pattern the next step needs, then stacked for a carton or laid out for a tray.

The interleaving unit

Parameter

TZJ-600

Model

TZJ-600

Belt width

600 mm, matched to the MF600 forming machine

Power

2.25 kW, 380 V or 220 V, 50 or 60 Hz

Compressed air

50 L/min

Dimensions

1818 x 916 x 1365 mm

Former compatibility

MF600 as standard; MF400 and MF240-II built to order

Belt width is the coupling dimension, not a preference. The 600 mm belt is what makes TZJ-600 a direct fit on the MF600 former; if your former runs a narrower belt, the unit is built to match rather than shimmed to fit. Power is available in 380 V or 220 V and in 50 or 60 Hz, so the same model covers European, Asian and North American supplies without a transformer.

Compressed air is the utility most often forgotten at the planning stage: the unit draws 50 L/min, which has to be counted when the ring main is sized.

Where the paper goes wrong

Paper is the failure point on any interleaving line. It fails in three predictable ways.

Curl. A roll stored in a humid room takes a set and the sheet lifts at the leading edge instead of lying flat, so the patty lands on a folded sheet. Rolls want a dry store and a short run from store to machine.

Static. In a dry, air-conditioned hall the sheet clings to the belt or to the previous sheet and arrives late. A sheet sized to slightly overhang the patty gives the feed something to register against.

Drift. A sheet narrower than the patty lets meat squeeze past the edge and bond the layers it was meant to separate. Sheet size is matched to the mould, and it changes when the mould changes.

Construction and hygiene

Built in 304 stainless for sanitary production, with food-contact parts removable for cleaning. The control cabinets stand separate from the forming head, which keeps the electrical side out of the wash-down zone, and a central cabinet carries the emergency stop and the line drive settings.

Where it sits in a burger line

Upstream sits a bowl cutter or grinder and a mixer for seasoning and binders; where a coated patty is produced, a batter and breadcrumb applicator follows the former. Downstream the interleaved stack goes into a freezer tunnel or blast freezer, then to a tray sealer or carton erector, with metal detection and check-weighing before packing.

The same arrangement runs chicken, pork and plant-based patties, and formed products such as nuggets and meatballs where layers have to be separated. If you are still choosing the former itself, the MF400 multi-shape forming machine covers the mid-capacity range, the MF600 the high-capacity end, and the MF240-II the compact one; all three sit under our forming machine range. For a full plant layout, see the patty and nugget production solution.

There is a short clip of the line running on YouTube — forming, interleaving and arranging in one pass.

Product Inquiry

content is empty!

Products

Quick Links

Contact Us

Tel: +86-531-88090460
WhatsApp:+86 185 6009 1508
Address: Zhengfeng Road, Licheng District, Jinan City, Shandong Province
  Copyrights  2022 Jinan TINDO International Co., Ltd.   Sitemap  Privacy Policy